M6-1.0 x 12mm Socket Head Powder Coated Your choice of colors
MINIMUM ORDER OF 6 MUST BE MADE
Thousands of other colors available upon request, minimum order may apply (to avoid extra fee).
A2-70 Stainless steel (If you need something else, please contact us for special order.
We use multiple steps before powder coating including media blasting to insure the best possible adhesion. The result is an excellent bond that can take a lot of abuse. The threads are kept clean so threading and torquing will not be altered. The head is fully coated which has an added benefit of acting as a gasket helping to keep dirt and water out of the threads, reducing corrosion and difficulty removing.
Powder coating offers an extremely durable, very attractive finish. Powder coat is very chip resistant and will not peel like paint. The powders we use are UV stable (unaffected by the suns uv rays that cause other finishes to fade) and chemical resistant (unaffected by most common products such as cleaners, fuel, brake fluid, solvents etc. even acetone) these fasteners will look great for many years with minimal care. Clean as you would most anything, cloth, brush etc.
Powder coated fasteners are a great way to enhance the look of your ride, on your bike, boat, 4 wheeler, furniture, just about anything. Use them to blend in with the objects their on or stand out and contrast to match other colors. Being stainless steel, you wont need to worry about rust, the durable powder coat finish will look great matching/contrasting colors on just about anything.
18-8 / A-2 stainless steel has a slightly lower tensile strength than a standard grade 5 steel bolt. If you need hardened or an otherwise different type of fastener, please contact us for a quote or any other questions you may have.
|Head Type||Thread Diameter||Thread Pitch||Length||Head Diameter||Drive Tool Size||Material|
|Button Head||6mm||1.0||12mm||10.2mm +/-||4mm allen||18-8 / A-2 Stainless|
|Closest 1/8″ Conversion||Closest 1/8″ Conversion||Closest Conversion|